DC Network Theorems Unit 5 – Kirchhoff's Solution with 2 Sources
Exercise 3 – Mesh Solution With 2 Sources
EXERCISE OBJECTIVE
When you have completed this exercise, you will be able to apply a mesh solution to a circuit
having two voltage sources. You will verify your results by using measured data.
DISCUSSION
- Mesh currents can be designated clockwise (CW) or counter clockwise (CCW). Once
designated the same convention must be used for every mesh in the circuit. - A voltage drop is considered positive when it is generated by its own mesh current.
- Circuit elements common to more than one mesh, have mesh currents from each mesh
flowing through them. - Mesh analysis determines the currents flowing through each circuit element.
- Apply Ohm’s law to determine voltage drops.