6-22 CHASSIS ELECTRICAL
Fig. 52 Remove the two bolts and screws retaining the ra< io fin-
ish panel
Fig. 53 Remove the radio bracket screws and extract the i nit
from Ihe dash
- Install the attaching screws.
- Reconnect the wiring harnesses to the switches if so equippi
trim panel and make sure the switches if so equipped are secure in - Install the trim panel (make sure all the spring clips engag>
tighten the screws. - Connect the negative battery cable.
- Check radio system for proper operation.
Speakers
REMOVAL & INSTALLATION
d in the
IB panel.
)and
I See Figure 51
Dash Mounted
- Make sure that the radio is off.
- Remove the speaker panel.
3. Remove the instrument panel box (some models).
4. Label and disconnect the speaker wires.
5. Remove the screws and extract the speaker.
6. Installation is the reverse of removal be sure to secure all compo-
nents.
Door Mounted
I See Figures 54 and 55
- Make sure that the radio is off.
- On some models the armrest must be removed.
- If equipped remove the power window switch or manual window han-
dle. - Remove the upper door panel, then the lower door panel.
- Label and disconnect the speaker wires.
- Remove the 3 screws and the speaker.
- Installation is the reverse of removal, secure all components.
Fig. 54 Speaker bolt locations on most door mounted speakers
Fig. 55 Label and disconnect the speaker wiring