TOYOTA PREVIA 91-97 REPAIR MANUAL

BRAKES 9-15

Fig. 53 Lubricate the sliding pin.

13. Install the front wheels and lower the vehicle.


14. Check the fluid level in the master cylinder and add as necessary. Be
    sure to pump the brake pedal a few times before road testing the vehicle.

Rear

> See Figures 56 thru 63

# CAUTION

Brake pads may contain asbestos, which has been determined

to be a cancer causing agent. Never clean the brake surfaces

with compressed air! Avoid inhaling any dust from any brake

surfaces. When cleaning brake surfaces, use a commercially

available brake cleaning fluid.

1. Raise and safely support the rear of the vehicle.


2. Remove the rear wheels and temporarily fasten the rotor disc with
   the hub nuts.
   ^Always replace the rear disc pads as a set.


3. Hold the sliding pin on the bottom of the caliper and loosen the
   installation bolt.

Fig. 54... and springs as needed for installation of the pads

Fig. 56 Remove the lower installation bolt on the rear brake

caliper

Fig. 55 Compress the pistons to install the brake pads Fig.^57 Lift the caliper and.