EARTHING AND SCREENING 383
References
1.IEEE Guide for safety in AC substation grounding. ANSI/IEEE Std 80–1986 Library of Congress Card
No. 86–081053 ISBN 0 471-85393-3
- R. W. Ryder,Earthing principles and practice. The dynamics and statics of electromechanical conversion.
Sir Isaac Pitman and Sons Ltd (1952).
- N. R. Malhothra.,Fault analysis in power systems. Volume 1. Orient Longmans, Bombay, India (1969).
4.Generator system grounding. Low or high impedance?Pamphlet KK 318–502 E Edition 1. ASEA, now
part of ABB (March 1970).
- R. Ball and G. W. Stephens,Neutral earthing of marine electrical power systems.Institute of Marine Engi-
neers UK.Trans. I Mar E, 1982, Vol. 95, Paper No. 32.
- W. C. Bloomquist, K. J. Owen and R. L. Gooch,High-resistance grounding power systems – why not?
IEEE Transactions on Industrial Applications.Vol. IA-12, Paper No. 6, 1976.
- L. J. Powell,Influence of third harmonic circulating currents in selecting neutral grounding devices.IEEE
Transactions on Industrial Applications.Vol. IA-9, Paper No. 6, 1973.
8.COMBIFLEX generator protective relaying. Pamphlet RK 64–200 E Edition 1. ASEA, now part of ABB
(March 1980).
- M. W. Earley, J. V. Sheehan and J. M. Caloggero,National electric code 1999 handbook. National Fire
Protection Association, USA. Eighth edition. ISBN 0 877-65437-9
10.Requirements for electrical installations. (BS 7671:1992). IEE Wiring Regulations, 1997. Sixteenth edition
plus amendments. ISBN 0 852-96927-9
- Westinghouse Electric Corporation.,Electrical transmission and distribution reference book. East Pittsburgh,
Pennsylvania, USA. Fourth edition, eighth printing, 1964.
12.IEEE recommended practice for grounding of industrial and commercial power systems. ANSI/IEEE Std
142–1972, revised 1991.
- D. S. Baker,Charging current data for guesswork-free design of high-resistance grounded systems.IEEE
Transactions on Industry Applications.Vol. IA-15, Paper No. 2, 1979.
- B. Bridger,High-resistance grounding.IEEE Transactions on Industry Applications.Vol. IA-19, Paper
No. 1, 1983.
- R. B. West,Grounding for emergency and standby power systems.IEEE Transactions on Industry Applica-
tions.Vol. IA-15, Paper No. 2, 1979.
16.Circulating currents in the enclosures of large rotating electrical machines of unit construction. Safety Notice
3/89, dated February 1989. Department of Energy, UK.
17.Large high voltage electric motors of type Ex(e) and Ex(N) operating in potentially explosive atmospheres.
Safety Notice 11/89, dated July 1989. Safety Notice 14/89, dated September 1989. Department of Energy, UK.
18.Gas releases from production and compression systems. Safety Notice 5/89, dated February 1989. Department
of Energy, UK.
- Henry W. Ott,Noise reduction techniques in electronic systems. John Wiley & Sons (1988). ISBN 0
471-85068-3
- Tim Williams,EMC for product designers. Newnes (Third edition, 2001). ISBN 0 750-64930-5
- P. A. Chatterton and M. A. Houldon,EMC electromagnetic theory to practical design. John Wiley & Sons
(Reprinted 1995). ISBN 0 471-92878-X
- R. L. Ozenbaugh,EMI filter design. Marcel Dekker AG (2001). ISBN 0 824 -78924-5
- J. H. Bull,Guide to achieving immunity from electrical interference. ERA Report No. 85–0146, (February
- ERA Technology Ltd, Leatherhead, Surrey, UK.
24.Design guide for electronic wire and cable. ECK-2-LB-C, 16 pages, (1972). Belden Corporation (USA) PO
Box 1980, Richmond, Indiana, USA. (also have published many similar articles).
- George V. Mueller,Introduction to electrical engineering. McGraw-Hill Book Co Inc. (USA). Library of
Congress Card No. 56–8869.
