Drive shaft--Front drive shaft- Assemble left lower control arm assembly [64000091]
(a) Assemble lower ball joint on lower suspension arm with the
bolts and screw caps.
Torque: 142 ± 10 N⋅⋅⋅⋅⋅m - Assemble left transversal lever assembly.
(a) Assemble transversal lever terminal to steering knuckle with
screw cap.
Torque: 49 ± 5 N⋅⋅⋅⋅⋅m
(b) Assemble new cotter pin.
Note: if hole position of cotter pin could not make a
line, lock the screw cap for 60. - Assemble speed sensor assembly of left front
wheels (equipping with ABS) [67000020]
(a) Assemble speed sensor absorber with bolts.
Torque: 49 ± 5 N⋅⋅⋅⋅⋅m
(b) Assemble speed sensor on the steering knuckle with bolts.
Torque: 8 N⋅⋅⋅⋅⋅m
Note:
z Do not damage speed sensor.
z Prevent it from contacting with sundries.
z When assembling the sensor, the wiring harness
of sensor could not bend.- Assemble fixing nuts of drive shaft [68000083]
(a) Assemble fixing nuts.
Torque: 216 ± 15 N⋅⋅⋅⋅⋅m
(b) Use chisel and hammer to knock the fixing nuts concave
and fix them. - Assemble front wheels.
Torque: 103 ± 10 N⋅⋅⋅⋅⋅m - Add the oil in gearbox.
- Check and adjust the oil in gearbox.
- Check and adjust wheel alignment (referring to page
87) - Check the ABS speed sensor (equipping with ABS).
- Test on road.
122