目录.p65

Malfunction

Wiper and cleaner do not work.

Wiper does not work on LO, HI or MIST.

Wiper does not work on INT

Washer generator does not work

When cleaner switch ON, wiper does not

work.

Wiper cleaner can not spout

z Right assembled switch on HI, wiper

blade will touch the bodywork.

z When right combination switches are OFF, washer will

not return to original position or stop position is incorrect.

Component names

1. ignition switch


2. ignition relay


3. (wiper) fuse (central power distribution box)


4. right assembled switch


5. wiring harness


6. right assembled switch


7. wiper generator


8. wiring harness


9. right assembled switch


10. wiper generator


11. wiring harness


12. (washer) fuse (central power distribution box)


13. wiper switch


14. wiper generator


15. wiring harness


16. right assembled switch


17. washer generator


18. wiring harness


19. cleaner hose and nozzle


20. right assembled switch *1


21. wiring harness

Reference pages

• 
  


• 
  


• 
  

  302

  
  

302

303

302

303

• 
  


• 
  


• 
  


• 
  

  302
  303

  
  


• 
  


• 
  

  302

  
  


• 
  

Inspect the car...............................................

Inspect the function of cleaner generator
(1) Add some rinsing to wiper water tank, then disassemble
cleaner generator joint.
(2) Connect battery wire with cleaner generator joint terminal2,
negative wire with terminal1,then inspect whether cleaner
generator works.
Notes: Be quick(in 20 seconds) to do this test to pre-
vent cleaner generator coil from burning.
If its function does not in accord with regulations, replace
cleaner generator.

Wiper and cleaner--Wiper and cleaner system

Wiper and cleaner

Wiper and cleaner system

Malfunction phenomena table......................

The underside table can help you to eliminating malfunction in wiring. It sorts as possibilities of malfunction’s
reasons.

*1:inspect set position of wiper arm and wiper blade.

 299