Chair--Rear chair (separating type)
(f) Disassemble the clamp, then disconnect exterior cover of
rear row backrest with gasket.
- Disassemble exterior cover of rear row chair
cushion.
Disassemble the clamp, then disconnect exterior cover of cush-
ion with gasket.
- Assemble exterior cover of rear row chair cushion.
Use new clamp to assemble exterior cover of rear row chair
Locking loop pliers
353
cushion in gasket.
Hint:
z Do not damage or dirty exterior cover of cushion.
z When assembling clamp, it is necessary to prevent exterior cover of cushion from crinkling.
- Assemble exterior cover of rear row chair backrest (big).
Hint:
z Do not damage or dirty exterior cover of cushion.
z When assembling clamp, it is necessary to prevent exterior cover of cushion from crinkling.
- Assemble exterior cover of rear row chair backrest (small).
Use new clamp to assemble exterior cover of rear row chair backrest in gasket.
Hint:
z Do not damage or dirty exterior cover of cushion.
z When assembling clamp, it is necessary to prevent exterior cover of cushion from crinkling.
14.Assemble rear backrest central hinge assembly.
Use two bolts to assemble central hinge assembly.
Torque: 20 N⋅⋅⋅⋅⋅m
- Assemble rear chair backrest side hinge assembly.
Use two bolts to assemble two side hinge assemblies.
- Assemble rear row chair left backrest assembly [68010078]
Use the bolt to assemble left backrest assembly.
Torque: 8.0 N⋅⋅⋅⋅⋅m
- Assemble rear row chair right backrest assembly [68010079]
Use the bolt to assemble right backrest assembly.
Torque: 8.0 N⋅⋅⋅⋅⋅m
- Assemble rear row chair backrest assembly.
Use four bolts to assemble backrest assembly.
Torque: 18 N⋅⋅⋅⋅⋅m
