Electric sunroof (optional)--Sunroof
- Use screw driver (twisted by adhesive tape) to align
the sunroof driving pull cable with right mark.
- Assemble sunroof shell body assembly.
(a) Bolt.
Torque: 5.5 N⋅⋅⋅⋅⋅m
(b) Screw cap.
Torque: 5.0 N⋅⋅⋅⋅⋅m
- Assemble the glass of sunroof.
(a) Check the phase difference between sunroof waterproof ad-
hesive tape and top gasket.
Front end and rear end: 0±1.5mm
Rear corner: 0±1.5mm
0-1.5mm
(b) Adjustment
Use T25 planetary wrench to loosen the screw to adjust
the sunroof on correct position, then lock the screw.
- Inspection for water leakage.
(a) After the adjustment, check whether the sunroof leaks water.
(b) If sunroof leaks water, adjust it again.
Assembly mark
363
