Engine mechanism - Engine assembly
- Install alternator mounting components.
Torque: 12mm bolt head A:
14mm bolt head B: - Install drive belt.
- Install engine wire harness and all hoses
not connected.
(a) Check and connect all joints of engine wire harness.
(b) Check and connect all hoses. - Install transmission control pull cable assembly
and valve control pull cable. - Install air filter assembly and its hose.
- Install steering middle shaft assembly.
(a) Align alignment mark on steering middle shaft.
(b) Install 2 bolts.
Torque: m
(c) Install steering column cover. - Install front exhaust pipe assembly.
- Install front chassis bracket.
Torque: - Install battery and connect wire.
- Install engine plastic hood components.
- Install front wheel and engine bottom shield.
- Refill transmission lubricant.
- Refill engine oil.
- Refill coolant.
- Check there is oil leakage.
- Check there is coolant leakage.
- Check idle speed and ignition timing.
- Check CO/HC.
Alignment
mark
Sliding in Pulling
44