目录.p65

Engine mechanism - Timing chain assembly

Timing chain assembly.......................................

Replacement...................................................

1. Remove engine left bottom shield.


2. Remove engine right bottom shield.


3. Discharge coolant.


4. Remove engine plastic hood components.


5. Remove drive belt.


6. Remove power steering pump assembly.


7. Remove alternator assembly.


8. Uncouple engine wire harness.
   (a) Remove ignition coil joint, PS fuel pressure switch joint,
   fuel line control joint and speed sensor joint.
   (b) Remove bolts and nuts of fixed earth wire and put aside
   engine wire harness.


9. Remove ignition coil assembly.


10. Remove cylinder head cover components.
    (a) Remove fuel pipe retaining clip and 2 PCV hoses from
    cylinder head cover.
    (b) Remove 9 bolts, 2 seal washers, cylinder head cover
    components and gasket.


11. Remove right engine mounting assembly.
    (a) Remove PS oil pump reservoir and put it aside.
    (b) Place wooden block between jack and engine, prop-
    erly place the jack, and then remove right engine mount-
    ing assembly.


12. Turn crankshaft to cylinder 1 compression top

dead center position.

13. Remove damping pulley components

[4G18-1005110].

Remove pulley bolts with special tool.

Remove damping pulley components with special tool.

Special

tool

Special

tool

45