Engine mechanism - Timing chain assembly- Install crankshaft front oil seal assembly.
(a) Coat a little MP grease on oil seal lip.
(b) Gently knock new oil seal in with special tool and ham-
mer until the seal surface is parallel and level with the
edge of timing chain cover.
Note: do not let oil seal mouth contact with foreign
matters. - Install timing chain hood components.
(a) Eliminate all old seal materials from contact surface.
(b) As shown in the diagram, coat sealant on the edge
(diameter 3.5mm-4.5mm).
Sealant: silicon rubber flange sealant 1596 (Kesaixin
1596).
(c) Install timing chain hood with 12 bolts and nuts.
Torque:
Notes:
Eliminate all grease on contact surface.
After coating sealant, finish installation of timing chain
hood within 3 minutes.
After installing, do not refill engine oil within 2 minutes.- Install chain tensioner components.
(a) Check o-ring is clean, and buckle on the hook as shown
in the diagram.
Special
tool48
SealantSealant widthChain cover
grooveCylinder
head grooveSealant
concentrationEnteringHook
PinLifting