目录.p65

Engine mechanism - Camshaft

Warning: if the air pressure in timing advance side oil duct is released earlier than that in

timing delay side oil duct, VVT driver assembly will move suddenly toward

delay side.This will cause the damage of lock pin.

(g) Remove VVT drive fixed bolts.

Notes:

It is strictly forbidden to remove other 4 bolts.

Under the condition of repeating using camshaft

timing sprocket, release lock pin at first, and then

install sprocket.

12. Install VVT driver assembly.


13. Install camshaft.
    Put VVT driver assembly together with intake camshaft.
    (a) As shown in the diagram, gently make VVT assembly
    hold camshaft and turn it toward left until straight pin is
    inserted into groove.
    Warning: it is strictly forbidden to turn camshaft
    timing sprocket toward timing delay side
    (toward right).

(b) Check there is no clearance between sprocket flange

and camshaft.

(c) Fix camshaft timing sprocket and then tighten flange

bolt.

Torque: 70 ±5N.m

(d) Check VVT driver assembly could move to timing

delay side and is locked at max. timing delay position.

(f) As shown in the diagram, align alignment mark with
timing mark on camshaft timing sprocket, and install
timing chain on the timing sprocket.
(g) Check forward mark and figure, and tighten bolts as
sequences shown in the diagram.
Torque: 13 ±0.78N.m

(h) Align alignment mark on the chain with timing mark on

camshaft timing sprocket, and place exhaust camshaft

in cylinder head.

Straight pin

key

groove

Flange bolt

Straight pin

56

Timing remark

chain link

Timing mark

Timing remark chain link

Timing mark