RIScov.pag

SHOP SETUP

When loaded with plywood, the cradle is almost evenly balanced but
with a little more weight on the side with the foot so that it always
tips the right way. After wheeling the plywood up to the saw, I tilt the
cradle back to the horizontal position where the locking bar falls into
a notch and locks. Since the dolly is the same height as my saw, I can
feed the plywood directly into the saw from the dolly.
—R.W. NORTH,Burbank, Calif.

Plywood Keeper

I

’VE USED THIS METHODon stacks of plywood up to 30 sheets thick.
Sink two eyescrews into the wall about 51 in. off the floor. Tie two
sash weights to a piece of string and suspend each weight from an
eyescrew. Cover the weights with foam pipe insulation to keep them
from marring the plywood.
—JOHNR. THIESEN,Cheektowaga, N.Y.

Wrap

window

weight

with pipe

insulation.

Plywood sheets