Plumbing Caps As Tool Ferrules
I
USE COMMON HARDWARE-STOREcopper plumbing caps for ferrules
on my custom turning tools. To use the caps, I turn a tenon on the
tool handle to fit the inside diameter of the cap. Then I drill (and file
if necessary) an opening in the cap to fit the shank of the tool. After
fitting the tool to the handle, I polish the cap and spray it with a clear
sealer to keep it looking good. The caps, which average about 40 cents
each, are available in sizes from^1 ⁄ 4 in. dia. up to 2 in. dia.
—WAYNEKNUTESON,Murray, Utah
SHOPMADE HAND TOOLS & HAND-TOOL FIXTURESCopper plumbing caps