Manual of Purpose-Made Woodworking Joinery

16 Drawings and rods

WORKING DRAWING/SETTING

OUT OF DOORFRAME WITH

SIDELIGHT

Figures 2.12(a)(b)(c)(d): Finally, on setting out, the

elevation and three designated section- views shown

below should be carefully studied to help develop the

skill of visualizing the separate detail related to the

position of elevational section- lines (with attention to

the direction of the arrow- heads).

(c) (d)

Figure 2.11 (c) Marking out of the horns, the five mor-
tises, haunch- grooves and panel- grooves on the face- side
and face- edge of one of the stiles; and (d) the marking
out squared around the face- side to give the position of
the mortises on the back- edge of the same stile – and the
separate wedge- allowance marks, added at one- third the
tenon’s thickness.

AB

C

A B

1192

2083

C

(a)

Figure 2.12 (a) Exterior elevation of a combined door-

frame and glazed sidelight.