Simulink Control Design™ - MathWorks

For the Linear Analysis Plots blocks, this parameter has no effect because no bounds are included by default. If you want to use ...

Command-Line Information Parameter: enabled Type: character vector Value: 'on' | 'off' Default: 'on' See Also Plot Linear Charac ...

Stop simulation when assertion fails Stop the simulation when a bound specified in the Bounds tab is violated during simulation, ...

Output assertion signal Output a Boolean signal that, at each time step, is: True ( 1 ) if assertion succeeds; that is, all bou ...

Show plot on block open Open the plot window instead of the Block Parameters dialog box when you double-click the block in the S ...

You must click this button before you simulate the model to view the system characteristics or signal. You can display additiona ...

This button is available only if you have Simulink Design Optimization software installed. See Also “Design Optimization to Mee ...

Check Bode Characteristics Check that Bode magnitude bounds are satisfied during simulation Library Simulink Control Design Desc ...

During simulation, the block can also output a logical assertion signal: If all bounds are satisfied, the signal is true ( 1 ). ...

Task Parameters Configure linearization. Specify inputs and outputs (I/Os). In Linearizations tab: Linearization inputs/outputs ...

Task Parameters Save linear system to MATLAB workspace. Save data to workspace in Logging tab. View bounds violations graphicall ...

Check Gain and Phase Margins Check that gain and phase margin bounds are satisfied during simulation Library Simulink Control De ...

During simulation, the block can also output a logical assertion signal: If all bounds are satisfied, the signal is true ( 1 ). ...

Task Parameters Specify settings. In Linearizations tab: Linearize on Snapshot times Trigger type Specify algorithm options. I ...

See Also Gain and Phase Margin Plot Tutorials “Verify Model at Default Simulation Snapshot Time” on page 14-6 “Verify Model at ...

Check Linear Step Response Characteristics Check that step response bounds on linear system are satisfied during simulation Libr ...

During simulation, the block can also output a logical assertion signal: If all bounds are satisfied, the signal is true ( 1 ). ...

Task Parameters Specify settings. In Linearizations tab: Linearize on Snapshot times Trigger type Specify algorithm options. I ...

See Also Linear Step Response Plot Tutorials “Verify Model at Default Simulation Snapshot Time” on page 14-6 “Verify Model at M ...

Check Nichols Characteristics Check that gain and phase bounds on Nichols response are satisfied during simulation Library Simul ...