Simulink Control Design™ - MathWorks

opt = findopOptions('DisplayReport','off');

op = findop(sys,opspec,params,opt);

findop trims the model for each parameter combination. op is a 6-by-4 array of

operating point objects that correspond to the specified parameter grid points.

See Also

findop | linearize | operspec

More About

• “Batch Compute Steady-State Operating Points for Multiple Specifications” on page
  1-91


• “Batch Compute Steady-State Operating Points Reusing Generated MATLAB Code”
  on page 1-105


• “Batch Linearize Model at Multiple Operating Points Using linearize Command” on
  page 3-28


• “Vary Operating Points and Obtain Multiple Transfer Functions Using slLinearizer
  Interface” on page 3-41

1 Steady-State Operating Points