Simulink Control Design™ - MathWorks

tuning goal plots update to reflect the checked designs. The solid trace corresponds to the

current design. Other designs are identified by name in the plot legend.

Use the same procedure save and compare as many designs as you need.

Restore Previously Saved Design

Under some conditions, it is useful to restore the tuned parameter values from a

previously saved design as the current design. For example, clicking Update Blocks

writes the current parameter values to the Simulink model. If you decide to test a stored

controller design in your full nonlinear model, you must first restore those stored values

as the current design.

10 Control System Tuning