Create an operating point specification object based on the current model configuration.
opspec = operspec(sys)
Operating point specification for the Model scdspeedctrl.
(Time-Varying Components Evaluated at time t=0)
States:
(1.) scdspeedctrl/External Disturbance/Transfer Fcn
spec: dx = 0, initial guess: 0
spec: dx = 0, initial guess: 0
(2.) scdspeedctrl/PID Controller/Filter/Cont. Filter/Filter
spec: dx = 0, initial guess: 0
(3.) scdspeedctrl/PID Controller/Integrator/Continuous/Integrator
spec: dx = 0, initial guess: 8.98
(4.) scdspeedctrl/Reference Filter/State Space
spec: dx = 0, initial guess: 200
(5.) scdspeedctrl/Throttle & Manifold/Intake Manifold/p0 = 0.543 bar
spec: dx = 0, initial guess: 0.544
(6.) scdspeedctrl/Vehicle Dynamics/w = T//J w0 = 209 rad//s
spec: dx = 0, initial guess: 209
Inputs: None
Outputs: None
Synchronize Simulink Model Changes with Operating Point Specifications