Create a default operating point specification object for the model.
opspec = operspec(sys)
Operating point specification for the Model scdspeed.
(Time-Varying Components Evaluated at time t=0)
States:
(1.) scdspeed/Throttle & Manifold/Intake Manifold/p0 = 0.543 bar
spec: dx = 0, initial guess: 0.543
(2.) scdspeed/Vehicle Dynamics/w = T//J w0 = 209 rad//s
spec: dx = 0, initial guess: 209
Inputs:
(1.) scdspeed/Throttle perturbation
initial guess: 0
Outputs: None
The default operating point specification object has no output specifications because
there are no root-level outports in the model.
Add an output specification to the outport of the rad/s to rpm block.
addoutputspec