Simulink Control Design™ - MathWorks

slLinearizer linearization interface for "scdcascade":

No analysis points. Use the addPoint command to add new points.

3 Permanent openings:

--------------------------

Opening 1:

• Block: scdcascade/Sum3


• Port: 1


• Signal Name: y2m
  Opening 2:


• Block: scdcascade/Sum


• Port: 1


• Signal Name: y1m
  Opening 3:


• Block: scdcascade/C1


• Port: 1


• Signal Name: u1

Properties with dot notation get/set access:

Parameters : []

OperatingPoints : [] (model initial condition will be used.)

BlockSubstitutions : []

Options : [1x1 linearize.LinearizeOptions]

The displays shows that 'y1m' is the second opening of sllin.

Remove the opening from the interface.

removeOpening(sllin,2);

Remove Multiple Openings Using Index

Create an slLinearizer interface for the scdcascade model.

sllin = slLinearizer('scdcascade');

Generally, you configure the interface with analysis points, openings, operating points,

and parameter values. For this example, add only openings to the interface.

addOpening(sllin,{'y2m','y1m','u1'});

15 Alphabetical List