Get Rate Conversion Settings of Tuned PID Block
Create an slTuner interface for the Simulink model scdcascade. Examine the block
rate conversion settings of one of the tuned blocks.
open_system('scdcascade');
st = slTuner('scdcascade',{'C1','C2'});
[IF,DF] = getBlockRateConversion(st,'C1')
IF =
'Trapezoidal'
DF =
'Trapezoidal'
C1 is a PID block. Therefore, its rate-conversion settings are expressed in terms of
integrator and derivative filter methods. For a continuous-time PID block, the rate-
getBlockRateConversion