- Evaluate a MATLAB expression.
- Stop the simulation and bring that block into focus.
During simulation, the block can also output a logical assertion signal:
- If all bounds are satisfied, the signal is true ( 1 ).
- If a bound is not satisfied, the signal is false ( 0 ).
For MIMO systems, the bounds apply to the Bode responses of linear systems computed
for all input/output combinations.
You can add multiple Bode Plot blocks to compute and plot the magnitude and phase of
various portions of the model.
You can save the linear system as a variable in the MATLAB workspace.
The block does not support code generation and can be used only in Normal simulation
mode.
Parameters
The following table summarizes the Bode Plot block parameters, accessible via the block
parameter dialog box.
Task Parameters
Configure
linearization.Specify inputs and
outputs (I/Os).In Linearizations tab:- “Linearization inputs/outputs” on page 16-
5. - “Click a signal in the model to select it” on
page 16-7.
Specify settings. In Linearizations tab: - “Linearize on” on page 16-10.
- “Snapshot times” on page 16-11.
- “Trigger type” on page 16-12.
Bode Plot