Command-Line Information
Parameter: UseBusSignalLabels
Type: character vector
Value: 'on' | 'off'
Default: 'off'
See Also
Plot Linear Characteristics of Simulink Models During Simulation on page 2-82
“Verify Model at Default Simulation Snapshot Time” on page 14-6
Include upper magnitude bound in assertion
Check that the Bode response satisfies upper magnitude bounds, specified in
Frequencies (rad/sec) on page 16-22 and Magnitude (dB) on page 16-24, during
simulation. The software displays a warning if the magnitude violates the upper bounds.
This parameter is used for assertion only if Enable assertion on page 16-32 in the
Assertion tab is selected.
You can specify multiple upper magnitude bounds on the linear system. The bounds also
appear on the Bode magnitude plot. If you clear Enable assertion, the bounds are not
used for assertion but continue to appear on the plot.
Settings
Default:
- Off for Bode Plot block.
- On for Check Bode Characteristics block.
On
Check that the magnitude satisfies the specified upper bounds, during simulation.Off
Do not check that the magnitude satisfies the specified upper bounds, during
simulation.Bode Plot