In this configuration, because the Frequency Response Estimator is not part of the closed
loop, you can optionally comment it out without disrupting the loop configuration.
Data Type — Floating point precision
double (default) | single
Specify the floating-point precision based on simulation environment or hardware
requirements.
Programmatic Use
Block Parameter: BlockDataType
Type: character vector
Values: 'double' | 'single'
Default: 'double'
Excitation signal source — Excitation signal source
Block parameters (default) | External ports
Specify whether to supply the frequencies and amplitudes of the experiment perturbation
signal via block parameters or via external ports.
- Block parameters — Select to enable the Frequencies and Amplitudes parameters.
Frequency Response Estimator