Bus signal names appear when the input and output are at the output of the following
blocks:- Root-level inport block containing a bus object
- Bus creator block
- Subsystem block whose source traces back to one of the following blocks:
- Output of a bus creator block
- Root-level inport block by passing through only virtual or nonvirtual subsystem
boundaries
Off
Use the bus signal channel number.Command-Line Information
Parameter: UseBusSignalLabels
Type: character vector
Value: 'on' | 'off'
Default: 'off'
See Also
Plot Linear Characteristics of Simulink Models During Simulation on page 2-82
“Verify Model at Default Simulation Snapshot Time” on page 14-6
Include gain and phase margins in assertion
Check that the gain and phase margins are greater than the values specified in Gain
margin (dB) > on page 16-127 and Phase margin (deg) > on page 16-128, during
simulation. The software displays a warning if the gain or phase margin is less than or
equals the specified value.
By default, negative feedback, specified in Feedback sign on page 16-129, is used to
compute the margins.
This parameter is used for assertion only if Enable assertion on page 16-133 in the
Assertion tab is selected.
Gain and Phase Margin Plot