Simulink Control Design™ - MathWorks

You can view the gain and phase margin bound on one of the following plot types on page

16-137:

• Bode


• Nichols


• Nyquist


• Table

If you clear Enable assertion, the bounds are not used for assertion but continue to

appear on the plot.

Settings

Default:

• Off for Gain and Phase Margin Plot block.


• On for Check Gain and Phase Margins block.

On

Check that the gain and phase margins satisfy the specified values, during simulation.

Off

Do not check that the gain and phase margins satisfy the specified values, during

simulation.

Tips

• Clearing this parameter disables the gain and phase margin bounds and the software
  stops checking that the gain and phase margins satisfy the bounds during simulation.
  The gain and phase margin bounds are also disabled on the plot.


• To only view the gain and phase margin on the plot, clear Enable assertion.

Command-Line Information

Parameter: EnableMargins

Type: character vector

Value: 'on' | 'off'

Default: 'off' for Gain and Phase Margin Plot block, 'on' for Check Gain and Phase

Margins block

16 Blocks — Alphabetical List