Simulink Control Design™ - MathWorks

Off

Do not output a Boolean signal to indicate assertion status.

Tips

• Use this parameter to design complex assertion logic. For an example, see “Verify
  Model Using Simulink Control Design and Simulink Verification Blocks” on page 14-
  25.

Command-Line Information
Parameter: export
Type: character vector
Value: 'on' | 'off'
Default: 'off'

See Also

Plot Linear Characteristics of Simulink Models During Simulation on page 2-82

“Verify Model at Default Simulation Snapshot Time” on page 14-6

Plot type

Plot to view gain and phase margins of the linear system computed during simulation.

Settings

Default: Bode

Bode

Bode plot.

Nichols

Nichols plot

Nyquist

Nyquist plot

Tabular

Table.

Gain and Phase Margin Plot