Simulink Control Design™ - MathWorks

Right-click the Bode, Nichols, or Nyquist plot, and select Characteristics > Minimum

Stability Margins to view gain and phase margins. The table displays the computed

margins automatically.

Command-Line Information

Parameter: PlotType

Type: character vector

Value: 'bode' | 'nichols' | 'nyquist' | 'table'

Default: 'bode'

See Also

Plot Linear Characteristics of Simulink Models During Simulation on page 2-82

“Verify Model at Default Simulation Snapshot Time” on page 14-6

Show plot on block open

Open the plot window instead of the Block Parameters dialog box when you double-click

the block in the Simulink model.

Use this parameter if you prefer to open and perform tasks, such as adding or modifying

bounds, in the plot window instead of the Block Parameters dialog box. If you want to

access the block parameters from the plot window, select Edit or click.

For more information on the plot, see Show Plot on page 16-39.

Settings

Default: Off

On

Open the plot window when you double-click the block.

Off

Open the Block Parameters dialog box when you double-click the block.

Command-Line Information

Parameter: LaunchViewOnOpen

16 Blocks — Alphabetical List