Bus signal names appear when the input and output are at the output of the following
blocks:- Root-level inport block containing a bus object
- Bus creator block
- Subsystem block whose source traces back to one of the following blocks:
- Output of a bus creator block
- Root-level inport block by passing through only virtual or nonvirtual subsystem
boundaries
Off
Use the bus signal channel number.Command-Line Information
Parameter: UseBusSignalLabels
Type: character vector
Value: 'on' | 'off'
Default: 'off'
See Also
Plot Linear Characteristics of Simulink Models During Simulation on page 2-82
“Verify Model at Default Simulation Snapshot Time” on page 14-6
Include step response bound in assertion
Check that the linear step response satisfies all the characteristics specified in:
- Final value on page 16-163
- Rise time on page 16-164 and % Rise on page 16-165
- Settling time on page 16-166 and % Settling on page 16-167
- % Overshoot on page 16-168
- % Undershoot on page 16-169
The software displays a warning if the step response violates the specified values.
Linear Step Response Plot