Default: '[]' for Linear Step Response Plot block, '5' for Check Linear Step Response
Characteristics block.
See Also
Plot Linear Characteristics of Simulink Models During Simulation on page 2-82
“Verify Model at Default Simulation Snapshot Time” on page 14-6
% Rise
The percentage of final value used with the Rise time on page 16-164.
Settings
Default:
Minimum: 0
Maximum: 100
- [] for Linear Step Response Plot block
- 80 for Check Linear Step Response Characteristics block
Positive scalar, less than (100 – % settling on page 16-167).
Tips
- To assert that the percent rise is satisfied, select both Include step response bound
in assertion on page 16-161 and Enable assertion on page 16-173. - To modify the percent rise from the plot window, drag the corresponding bound
segment. Alternatively, right-click the segment, and select Bounds > Edit. Specify the
new value in % Rise. You must click Update Block before simulating the model.
Command-Line Information
Parameter: PercentRise
Type: character vector
Value: [] | 80 | positive scalar between 0 and 100. Must be specified inside single quotes
('').
Default: '[]' for Linear Step Response Plot block, '80' for Check Linear Step
Response Characteristics block.
Linear Step Response Plot