Simulink Control Design™ - MathWorks

See Also

Plot Linear Characteristics of Simulink Models During Simulation on page 2-82

“Verify Model at Default Simulation Snapshot Time” on page 14-6

Settling time

The time, in seconds, taken for the step response to settle within a specified range around

the final value. This settling range is defined as the final value plus or minus the

percentage of the final value, specified in % Settling on page 16-167.

Settings

Default:

• [] for Linear Step Response Plot block


• 7 for Check Linear Step Response Characteristics block

Finite positive real scalar, greater than rise time on page 16-164.

Tips

• To assert that the settling time is satisfied, select both Include step response bound
  in assertion on page 16-161 and Enable assertion on page 16-173.


• To modify the settling time from the plot window, drag the corresponding bound
  segment. Alternatively, right-click the segment, and select Bounds > Edit. Specify the
  new value in Settling time. You must click Update Block before simulating the
  model.

Command-Line Information

Parameter: SettlingTime

Type: character vector

Value: [] | 7 | positive finite real scalar. Must be specified inside single quotes ('').

Default: '[]' for Linear Step Response Plot block, '7' for Check Linear Step Response

Characteristics block.

See Also

Plot Linear Characteristics of Simulink Models During Simulation on page 2-82

“Verify Model at Default Simulation Snapshot Time” on page 14-6

16 Blocks — Alphabetical List