% Settling
The percentage of the final value that defines the settling range of the Settling time on
page 16-166.
Settings
Default:
Minimum: 0
Maximum: 100
- [] for Linear Step Response Plot block
- 1 for Check Linear Step Response Characteristics block
Real number, less than (100 – % rise on page 16-165) and less than % overshoot on page
16-168.
Tips
- To assert that the percent settling is satisfied, select both Include step response
bound in assertion on page 16-161 and Enable assertion on page 16-173. - To modify the percent settling from the plot window, drag the corresponding bound
segment. Alternatively, right-click the segment, and select Bounds > Edit. Specify the
new value in % Settling. You must click Update Block before simulating the model.
Command-Line Information
Parameter: PercentSettling
Type: character vector
Value: [] | 1 | real value between 0 and 100. Must be specified inside single quotes ('').
Default: '[]' for Linear Step Response Plot block, '1' for Check Linear Step Response
Characteristics block.
See Also
Plot Linear Characteristics of Simulink Models During Simulation on page 2-82
“Verify Model at Default Simulation Snapshot Time” on page 14-6
Linear Step Response Plot