Command-Line Information
Parameter: UseBusSignalLabels
Type: character vector
Value: 'on' | 'off'
Default: 'off'
See Also
Plot Linear Characteristics of Simulink Models During Simulation on page 2-82
“Verify Model at Default Simulation Snapshot Time” on page 14-6
Include gain and phase margins in assertion
Check that the gain and phase margins are greater than the values specified in Gain
margin (dB) > on page 16-202 and Phase margin (deg) > on page 16-203, during
simulation. The software displays a warning if the gain or phase margin is less than or
equal to the specified value.
By default, negative feedback, specified in Feedback sign on page 16-129, is used to
compute the margins.
This parameter is used for assertion only if Enable assertion on page 16-215 in the
Assertion tab is selected.
You can specify multiple gain and phase margin bounds on the linear system. The bounds
also appear on the Nichols plot. If you clear Enable assertion, the bounds are not used
for assertion but continue to appear on the plot.
Settings
Default:
- Off for Nichols Plot block.
- On for Check Nichols Characteristics block.
On
Check that the gain and phase margins satisfy the specified values, during simulation.Nichols Plot