Simulink Control Design™ - MathWorks

Settings

Default: []

Must be specified as start and end gains:

• Positive or negative number for a single bound with one edge


• Matrix of positive or negative finite numbers for a single bound with multiple edges


• Cell array of matrices with finite numbers for multiple bounds

Tips

• To assert that the open-loop gains are satisfied, select both Include open-loop gain-
  phase bound in assertion on page 16-207 and Enable assertion on page 16-215.


• You can add or modify open-loop gains from the plot window:
  
  
  • To add a new gains, right-click the plot, and select Bounds > New Bound. Select
    Gain-Phase requirement in Design requirement type, and specify the gains
    in the Open-Loop phase column. Specify the phases in the Open-Loop phase
    column.
  
  
  • To modify the gains, drag the bound segment. Alternatively, right-click the
    segment, and select Bounds > Edit Bounds. Specify the new gains in the Open-
    Loop gain column.
  
  
  
  

You must click Update Block before simulating the model.

Command-Line Information

Parameter: OLGains

Type: character vector

Value: [] | positive or negative number | matrix of positive or negative finite numbers |

cell array of matrices with finite numbers. Must be specified inside single quotes ('').

Default: '[]'

See Also

Plot Linear Characteristics of Simulink Models During Simulation on page 2-82

“Verify Model at Default Simulation Snapshot Time” on page 14-6

16 Blocks — Alphabetical List