- Evaluate a MATLAB expression.
- Stop the simulation and bring that block into focus.
During simulation, the block can also output a logical assertion signal:
- If all bounds are satisfied, the signal is true ( 1 ).
- If a bound is not satisfied, the signal is false ( 0 ).
You can add multiple Pole-Zero Plot blocks to compute and plot the poles and zeros of
various portions of the model.
You can save the linear system as a variable in the MATLAB workspace.
The block does not support code generation and can be used only in Normal simulation
mode.
Parameters
The following table summarizes the Pole-Zero Plot block parameters, accessible via the
block parameter dialog box.
Task Parameters
Configure linearization. Specify inputs and outputs
(I/Os).In Linearizations tab:- “Linearization inputs/
outputs” on page 16-246. - “Click a signal in the
model to select it” on
page 16-248.
Specify settings. In Linearizations tab: - “Linearize on” on page
16-251. - “Snapshot times” on
page 16-252. - “Trigger type” on page
16-253.
Pole-Zero Plot