Positive finite value. Use to compute:
- A discrete-time linear system from a continuous-time system.
- A discrete-time linear system from another discrete-time system with a different
sample time
0
Use to compute a continuous-time linear system from a discrete-time model.Command-Line Information
Parameter: SampleTime
Type: character vector
Value: 'auto' | Positive finite value | '0'
Default: 'auto'
See Also
Plot Linear Characteristics of Simulink Models During Simulation on page 2-82
“Verify Model at Default Simulation Snapshot Time” on page 14-6
Sample time rate conversion method
Method for converting the sample time of single-rate or multirate models.
This parameter is used only when the value of Linear system sample time on page 16-
256 is not auto.
Settings
Default: Zero-Order Hold
Zero-Order Hold
Zero-order hold, where the control inputs are assumed piecewise constant over the
sampling time Ts. For more information, see “Zero-Order Hold” (Control System
Toolbox).This method usually performs better in the time domain.Pole-Zero Plot