Simulink Control Design™ - MathWorks

See Also

Plot Linear Characteristics of Simulink Models During Simulation on page 2-82

“Verify Model at Default Simulation Snapshot Time” on page 14-6

Use full block names

How the state, input and output names appear in the linear system computed during

simulation.

The linear system is a state-space object, and system states and input/output names

appear in following state-space object properties:

Input, Output or State Name Appears in Which State-Space Object

Property

Linearization input name InputName

Linearization output name OutputName

State names StateName

Settings

Default: Off

On

Show state and input/output names with their path through the model hierarchy. For

example, in the chemical reactor model, a state in the Integrator1 block of

the CSTR subsystem appears with full path as scdcstr/CSTR/Integrator1.

Off

Show only state and input/output names. Use this option when the signal name is

unique and you know where the signal is location in your Simulink model. For

example, a state in the Integrator1 block of the CSTR subsystem appears as

Integrator1.

Command-Line Information

Parameter: UseFullBlockNameLabels

Type: character vector

16 Blocks — Alphabetical List