Simulink Control Design™ - MathWorks

Settings

Default: []

Minimum: 0

Maximum: 1

• Finite positive real scalar for single damping ratio bound.


• Cell array of finite positive real scalars for multiple damping ratio bounds.

Tips

• The damping ratio ζ, and percent overshoot p.o are related as:

p.o. = 100e−πζ/^1 −ζ

2

.

• To assert that the damping ratio bounds are satisfied, select both Include damping
  ratio bound in assertion on page 16-268 and Enable assertion on page 16-277.


• You can add or modify damping ratio bounds from the plot window:
  
  
  • To add a new damping ratio bound, right-click the plot and select Bounds > New
    Bound. Select Damping ratio in Design requirement type and specify the
    value in Damping ratio >.
  
  
  • To modify a damping ratio bound, drag the corresponding bound segment or right-
    click it and select Bounds > Edit. Specify the new value in Damping ratio >.
  
  
  
  

You must click Update Block before simulating the model.

Command-Line Information

Parameter: DampingRatio

Type: character vector

Value: [] | finite positive real scalar between 0 and 1 | cell array of

finite positive real scalars between 0 and 1. Must be specified inside

single quotes ('').

Default: '[]'

See Also

Plot Linear Characteristics of Simulink Models During Simulation on page 2-82

“Verify Model at Default Simulation Snapshot Time” on page 14-6

16 Blocks — Alphabetical List