On
Display the filtered list of signals using a flat list format, indicating bus hierarchies
with dot notation instead of using a tree format.Off
Display filtered bus hierarchies using a tree format.Dependencies
Selecting the Options button on the right-hand side of the Filter by name edit box ( )
enables this parameter.
Linearize on
When to compute the linear system during simulation.
Settings
Default: Simulation snapshots
Simulation snapshots
Specific simulation time, specified in Snapshot times on page 16-294.Use when you:- Know one or more times when the model is at a steady-state operating point
- Want to compute the linear systems at specific times
External trigger
Trigger-based simulation event. Specify the trigger type in Trigger type on page 16-
295.Use when a signal generated during simulation indicates steady-state operating point.Selecting this option adds a trigger port to the block. Use this port to connect the
block to the trigger signal.For example, for an aircraft model, you might want to compute the linear system
whenever the fuel mass is a fraction of the maximum fuel mass. In this case, model
this condition as an external trigger.Singular Value Plot