Simulink Control Design™ - MathWorks

Command-Line Information

Parameter: UseExactDelayModel

Type: character vector

Value: 'on' | 'off'

Default: 'off'

See Also

Plot Linear Characteristics of Simulink Models During Simulation on page 2-82

“Verify Model at Default Simulation Snapshot Time” on page 14-6

Linear system sample time

Sample time of the linear system computed during simulation.

Use this parameter to:

• Compute a discrete-time system with a specific sample time from a continuous-time
  system


• Resample a discrete-time system with a different sample time


• Compute a continuous-time system from a discrete-time system

When computing discrete-time systems from continuous-time systems and vice-versa, the

software uses the conversion method specified in Sample time rate conversion

method on page 16-299.

Settings

Default: auto

auto. Computes the sample time as:

• 0, for continuous-time models.


• For models that have blocks with different sample times (multirate models), least
  common multiple of the sample times. For example, if you have a mix of
  continuous-time and discrete-time blocks with sample times of 0, 0.2 and 0.3, the
  sample time of the linear model is 0.6.

16 Blocks — Alphabetical List