Simulink Control Design™ - MathWorks

Show plot on block open

Open the plot window instead of the Block Parameters dialog box when you double-click

the block in the Simulink model.

Use this parameter if you prefer to open and perform tasks, such as adding or modifying

bounds, in the plot window instead of the Block Parameters dialog box. If you want to

access the block parameters from the plot window, select Edit or click.

For more information on the plot, see Show Plot on page 16-39.

Settings

Default: Off

On

Open the plot window when you double-click the block.

Off

Open the Block Parameters dialog box when you double-click the block.

Command-Line Information

Parameter: LaunchViewOnOpen

Type: character vector

Value: 'on' | 'off'

Default: 'off'

See Also

Plot Linear Characteristics of Simulink Models During Simulation on page 2-82

“Verify Model at Default Simulation Snapshot Time” on page 14-6

Show Plot

Open the plot window.

Use the plot to view:

• System characteristics and signals computed during simulation

16 Blocks — Alphabetical List