NoteThe Linear Analysis Tool only collects diagnostic information when Linearization
Advisor is checked before performing a linearization task.
Estimation Tab
Input Signal — Estimation input signal
Sinestream | Fixed Sample Time Sinestream | Chirp | Random
Estimation input signal. The current input signal is displayed. To change the input signal,
select one of the following:
- Sinestream — Create an input signal that consists of adjacent sine waves of varying
frequencies. For more information, see “Sinestream Input Signals” on page 5-37. - Fixed Sample Time Sinestream — Create a discrete-time sinestream input with a
specified sample time. - Chirp — Create a swept-frequency cosine input signal. For more information, see
“Chirp Input Signals” on page 5-42. - Random — Create a random input signal.
Analysis I/Os — Linearization inputs, outputs, and loop openings
Model I/Os (default) | linearization I/O set
Linearization inputs, outputs, and loop openings. The currently active I/O set is displayed.
To change the I/O set, select one of the following:
- Model I/Os — Use the inputs, outputs, and loop openings specified in the Simulink
model. For more information on specifying analysis points in your model, see “Specify
Portion of Model to Linearize in Simulink Model” on page 2-23. - Root Level Inports and Outports — Use the root level inputs and outputs of
the Simulink model. - Linearize the Currently Selected Block — Use the input and output ports of
the currently selected block in the Simulink model. - Create New Linearization I/Os — Specify inputs, outputs, and loop openings.
For more information, see “Specify Portion of Model to Linearize in Linear Analysis
Tool” on page 2-31. - Existing I/Os — Select a previously created I/O set.
- View/Edit — View or edit the currently selected operating point. For more
information, see “Edit Analysis Points” on page 2-36.
Linear Analysis Tool