Simulink Control Design™ - MathWorks

(^1) Create a sinestream input signal, in_sine1, as shown in “Create Sinestream Signals
Using Linear Analysis Tool” on page 5-39.
(^2) Double-click in_sine1 in the Linear Analysis Workspace area of the Linear Analysis
Tool.
The Edit sinestream dialog box opens.
(^3) In the Frequency content viewer, select the frequency point to delete.
The selected point appears blue.
TipTo select multiple frequency points, click and drag across the frequency points of
interest.
4
Click in the Frequency content toolbar to delete the selected frequency point(s)
from the Frequency content viewer.
(^5) Click OK to save the modified input signal.
Modify Parameters for a Frequency Point in Sinestream Input Signal
This example shows how to modify signal parameters of an existing sinestream input
signal using the Linear Analysis Tool.
(^1) Create a sinestream input signal, in_sine1, as shown in “Create Sinestream Signals
Using Linear Analysis Tool” on page 5-39.
2 Double-click in_sine1 in the Linear Analysis Workspace area of the Linear Analysis
Tool.
The Edit sinestream dialog box opens.
(^3) In the Frequency content viewer, select the frequency point(s) to delete.
Modify Estimation Input Signals