Simulink Control Design™ - MathWorks

(^2) In the Simulink Editor, select Analysis > Control Design > Linear Analysis.
(^3) In the Linear Analysis Tool, in the Operating Point drop-down list, click Take
Simulation Snapshot.
(^4) In the Enter snapshot times to linearize dialog box, enter 10 in the Simulation
snapshot times field to extract the operating point at this simulation time.
(^5) To take a snapshot of the system at the specified time, click Take Snapshots.
The snapshot, op_snapshot1, appears in the Data Browser, in the Linear Analysis
Workspace section and contains all the system state values at the specified time.
(^6) On the Linear Analysis tab, in the Operating Point drop-down list, click Trim
Model.
(^7) To Initialize the operating point states with the simulation snapshot values, in the
Trim the model dialog box, click Import.
(^8) In the Import initial values and specifications dialog box, select op_snapshot1, and
click Import.
Initialize Steady-State Operating Point Search Using Simulation Snapshot