488 References
complete stress-strain curve for intact rock in uniaxial compression. Int. J.
Rock Mech. Min. Sci., 36, 3,279-289.
Fjaer E., Holt R. M., Horsrud P., Raaen A. M. and Risnes R. (1992) Petroleum
Related Rock Mechanics. Elsevier, Oxford, 338pp.
Fookes P. G. (1997) Geology for Engineers: the geological model, prediction and
performance. Q. J. Eng. Geol., 30,293424.
Giani G. P. (1992) Rock Slope Stability Analysis. Balkema, Rotterdam, 361pp.
Goodman R. E. (1989) Introduction to Rock Mechanics, 2nd edn., Wiley, New York,Goodman R. E. (1998) The Engineer as Artist. ASCE Press, Reston, VA, 34Opp.
Haimson B. C. (1987) Measurement of in situ stress, in Geophysics, Methods of
Experimental Physics, Vol. 24B (C. G. Sammis and T. L. Henyey (eds), Academic
Press, New York, pp. 377-408.
Haimson B. C. (1997) Borehole Breakouts and Core Disking as Tools for Estim-
ating In Situ Stress in Deep Holes, in Proc. of the Rock Stress Conference (K.
Sugawara and Obara Y., eds). Balkema, Rotterdam, pp. 3542.
Harrison J. P. (1999) Selection of the RQD threshold value in RQD assessments.
Int. J. Rock Mech. Min. Sci., 36,5,673-685.
Hoek E. (1990) Estimating Mohr-Coulomb friction and cohesion values from
the Hoek-Brown failure criterion. Int. J. Rock Mech. Min. Sci., 27,3,227-229.
Hoek E. and Bray J. W. (1977) Rock Slope Engineering. Institution of Mining and
Metallurgy, London, 402pp.
Hoek E. and Brown E. T. (1980) Underground Excavations in Rock. Institution of
Mining and Metallurgy, London, 527pp.
Hoek E. and Brown E. T. (1988) Hoek-Brown failure criterion - a 1988 update.
Proc. 15th Canadian Rock Mech. Symp. University of Toronto, ON, pp. 31-38.
Hoek E. and Brown E. T. (1997) Practical estimates of rock mass strength. Int. J.
Rock Mech. Min. Sci., 34,8,1165-1186.
Hoek E., Bawden W. E and Kaiser P. K. (1995) Support of Underground Excavations
in Hard Rock. Balkema, Rotterdam, 215pp.
Hudson J. A. (1989) Rock Mechanics Principles in Engineering Practice. CIRIA
Report, Butterworths, London, 72pp.
Hudson J. A. (1992) Rock Engineering Systems: Theory and Practice. Ellis-Honvood,
Chichester, 185pp.
Hudson J. A. (1999) Keynote lecture: technical auditing of rock mechanics
modelling and rock engineering design, in Proc. 37th US Rock Mechanics
Symposium held at Vail, CO, 1999 (B. Amadei, R. L. Kranz, G. A. Scott and P.
H. Smeallie, eds). Balkema, Rotterdam, pp. 3-12.
Hudson J. A. and Harrison J. P. (1997) Engineering Rock Mechanics: An Intro-
duction to the Principles. Elsevier, Oxford, 444p. This book is referred to in
the text as ERM 1.
Hudson J. A. and Jiao Y. (2001) Analysis of Rock Engineering Projects. Imperial
College Press, London (in preparation).
Jaeger J. C. and Cook N. G. W. (1979) Fundamentals of Rock Mechanics. Chapman
and Hall, London, 3rd edn., 593pp.
Jiao Y. and Hudson J. A. (1998) Identifying the critical mechanisms for rock
engineering design. Giotechnique, 48’3,319-335.
Jimeno C. L., Jimeno E. L. and Carcedo F. J. A. (1995) Drilling and Blasting of
Rocks, Balkema, Rotterdam, 391pp.
Judd W. R. (1965) Some rock mechanics problems in correlating laboratory
results with prototype reactions. Int. J. Rock Mech. Min. Sci., 2,197-218.
Kim K. and Franklin J. A. (1987) Suggested methods for rock stress determina-
tion. Int. J Rock Mech. Min. Sci. Geomech. Abstr., 24,1, 53-73.562pp.