11.11MARSLAND, A. and EASTON, B. J. Measurements of the displacement in the ground below loaded
plates in deep boreholes, Proceedings of the Symposium on Field Instrumentation, British
Geotechnical Society, London, 1973, pp. 304–17.
11.12MCKINLAY, D. G., TOMLINSON, M. J., and ANDERSON, W. F. Observations on the undrained strength
of a glacial till, Geotechnique, Vol. 24, No. 4, December 1974, pp. 503–16.
11.13BUTLER, F. G. and LORD, J. A. Discussion, Proceedings of the Conference on In-Situ Investigations
in Soils and Rocks, British Geotechnical Society, London, 1970, pp. 51–3.
11.14 Point load test – suggested method for determining point load strengths, International Journal
of Rock Mechanics and Mining Sciences, Vol. 22, No. 2, 1985, pp. 53–60.
11.15Guidance Notes for Site Investigations for Offshore Renewable Energy Projects, Society for
Underwater Technology, 2005.
11.16 New Engineering Contract (NEC3). The Engineering and Construction Contract, 3rd edn,
Institution of Civil Engineers, Thomas Telford, London, 2005.
11.17Civil Engineering Standard Method of Measurement, 3rd edn, Institution of Civil Engineers,
Thomas Telford, London, 1991.
11.18WHITAKER, T. The constant rate of penetration test for the determination of the ultimate bearing
capacity of a pile, Proceedings of the Institution of Civil Engineers, Vol. 26, September 1963,
pp. 119–23.
11.19DE COCK F., LEGRAND C., and HUYBRECHTS N. Axial static pile test in compression or in tension–
Recommendations from ERTC – Piles, ISSMGE Subcommittee, Proceedings of the 13th
European Conference on Soil Mechanics and Geotechnical Engineering, Prague, Vol. 3, 2003,
pp. 717–41.
11.20FLEMING, W. G. K. Static load tests of piles and their application, Institution of Civil Engineers,
Ground Engineering Board, Notes for meeting on 22 May 1991.
11.21HANNA, T. H. Foundation Instrumentation, Transtech Publications, Aedermansdorff,
Switzerland, 1973, pp. 35–66.
11.22HANNA, T. H. Personal communication to the authors.
11.23WELTMAN, A. J. Pile load testing procedures. Construction Industry Research and Information
Association (CIRIA), Report PG7, 1980.
11.24LONG, M. Assessment of SIMBAT dynamic pile tests, ASCE Special Publication, Vol. 113, 2002,
pp. 539–53.
11.25BERMINGHAM, P. and JANES, M. An innovative approach to load testing of high capacity piles,
Proceedings of the International Conference on Piling and Deep Foundations, London,
Balkema, Rotterdam, 1989.
11.26CHIN, FUNG KEE. Diagnosis of pile condition, Geotechnical Engineering, Vol. 9, 1978, pp.
85 – 104.
11.27TURNER, M. J. Integrity testing in piling practice, Construction Industry Research and
Information Association (CIRIA), Report 144, 1997.
11.28MOON, R. A. Test method for the structural integrity of bored piles, Civil Engineering and Public
Works Review, Vol. 67, No. 790, May 1972, pp. 476–80.
11.29ISKANDER, M., ROY, D., SHELLY, S., and EALY, C. Drilled shaft defects: detection, and effects on
capacity in varved clay, ASCE Journal of Geotechnical and Geoenvironmental Engineering,
December 2003, pp. 1128–37.
538 Ground investigations, contracts and pile testing