AWS EDITION 1, 2009

118

© 2009, AWI, AWMAC, WI - Architectural Woodwork Standards - 1st Edition, October 1, 2009

As may be updated by errata at http://www.awinet.org, http://www.awmac.com, or http://www.woodworkinstitute.com/awserrata/

Section 5 - Finishing (Page 17 of 19)

PRODUCT

FINISHING RULES (continued)

These rules are not intended to create a finishing grade; they are intended only to establish the acceptable requirements

and/or characteristics after the architectural woodwork is completed or installed.

DESCRIPTION E C P



4.3

A P P L I C A T I O N

APPLICATION (continued)



4.3.15

S Y S T E M C O A T I N G S C H E D U L E

At SYSTEM COATING SCHEDULE (continued)



4.3.15.9

S

Y

S

11

&

12

SYSTEM - 11 and 12, POLYURETHANE, CATALYZED, or WATER-BASED

(continued)

4.3.15.9.2 OPEN-GRAIN woods (including filled finish)

4.3.15.9.2.1 [Wash coat, reduced vinyl sealer] (only at filled

finish)

MM

4.3.15.9.2.2 [Stain]

4.3.15.9.2.3 Filler (only at filled finish) MM

4.3.15.9.2.4 Sealer, vinyl

4.3.15.9.2.5 First topcoat

4.3.15.9.2.6 Second topcoat M

4.3.15.10

S Y S T E M

13

SYSTEM - 13, POLYESTER, CATALYZED requires items in [brackets] only if so specified;

only applicable to Premium Grade:

4.3.15.10.1 CLOSE- and OPEN-GRAIN woods

4.3.15.10.1.1 [Stain] M

4.3.15.10.1.2 First sealer, polyester M

4.3.15.10.1.3 Second sealer, polyester M

4.3.15.10.1.4 Sand with appropriate grit M

4.3.15.10.1.5 Topcoat, polyester M

4.3.15.10.1.6 Rub and polish, mechanical M

4.3.16 AFTER FINISHING

4.3.16.1 Remove all spilled, splashed, or spattered finish materials.

4.3.16.2 Remove all fingerprints or other marks.

4.3.16.3 Provide a final dusting of all exterior and interior surfaces, including drawers.

4.3.16.4 Provide properly labeled touch-up materials to allow for minor touch-up.

4.3.17 TOUCH-UP of:

4.3.17.1 Factory-finished materials are the responsibility of the installation contractor.

4.3.17.2 Jobsite-finished materials are the responsibility of the finishing contractor.

EXECUTION

(Items # 5 & 6 are not applicable to this section)

5