AWS EDITION 1, 2009

186

© 2009, AWI, AWMAC, WI - Architectural Woodwork Standards - 1st Edition, October 1, 2009

As may be updated by errata at http://www.awinet.org, http://www.awmac.com, or http://www.woodworkinstitute.com/awserrata/

Section 8 - Wall Surfacing (Page 15 of 32)

PRODUCT

MATERIAL, MACHINING, AND ASSEMBLY RULES (continued)

DESCRIPTION E C P



4.2

M A T E R I A L 

MATERIAL (continued)



4.2.11

W O O D V E N E E R 

At WOOD VENEER (continued)



4.2.11.3

O P A Q U E

For OPAQUE finish, face shall (continued)

4.2.11.3.6 Have visible REVEALS and SPLINES that are:

4.2.11.3.6.1 Full length.

4.2.11.3.6.2 Of mill-option species.

4.2.11.3.7 Have EDGES:

4.2.11.3.7.1 Filled and sanded. M

4.2.11.3.7.2 Banded with close-grain material, with: MM

4.2.11.3.7.2.1 FINGER JOINTS permitted. MM

4.2.11.4

T R A N S P A R E N T 

For TRANSPARENT finish, shall:

4.2.11.4.1 Have FACES that are:

4.2.11.4.1.1 ROTARY-sliced. M

4.2.11.4.1.2 PLAIN-sliced. MM

4.2.11.4.1.3 Between ADJACENT LEAVES:

4.2.11.4.1.3.1 MILL-OPTION MATCH M

4.2.11.4.1.3.2 BOOK-MATCHED MM

4.2.11.4.1.4 Within each PANEL FACE:

4.2.11.4.1.4.1 MILL-OPTION MATCH M

4.2.11.4.1.4.2 RUNNING MATCH M

4.2.11.4.1.4.3 BALANCED-MATCH M

4.2.11.4.1.5 Between ADJACENT PANELS:

4.2.11.4.1.5.1 MILL-OPTION SEQUENCE M

4.2.11.4.1.5.2

SEQUENCED, NUMBERED,

PREMANUFACTURED SET(S) M

4.2.11.4.1.5.3

Custom made to order SEQUENCED

AND NUMBERED SET(S) M

4.2.11.4.1.6 Within a PROJECT AREA:

4.2.11.4.1.6.1 MILL-OPTION SEQUENCE. M

4.2.11.4.1.6.2 SEQUENCED, NUMBERED, PREMANUFACTURED SET(S) M

4.2.11.4.1.6.3 Custom made to order and NUMBERED SET(S)SEQUENCED^ M

4.2.11.4.2 Have visible EDGES, REVEALS, and/or SPLINES, when appropriate, that are:

4.2.11.4.2.1 Full length.

4.2.11.4.2.2 MILL-OPTION. M

4.2.11.4.2.3 MATCH species of panel face. MM

4.2.11.4.2.4 COMPATIBLE for color and grain. M

4.2.11.4.2.5 WELL-MATCHED for color and grain. M

4.2.11.4.2.6 A minimum of 0.020" (0.5 mm) nominal THICKNESS that

precludes show-through of core.

MM

4.2.11.4.2.7

WITHIN A PANEL, solid wood shall be let into the core

before the veneer is applied with the reveal routed through

the veneer into the solid wood.

MM

8