AWS EDITION 1, 2009

203

© 2009, AWI, AWMAC, WI - Architectural Woodwork Standards - 1st Edition, October 1, 2009

As may be updated by errata at http://www.awinet.org, http://www.awmac.com, or http://www.woodworkinstitute.com/awserrata/

Section 8 - Wall Surfacing (Page 32 of 32)

COMPLIANCE

7 FABRICATED and INSTALLED (continued)

7.3 GAPS, FLUSHNESS, FLATNESS, and ALIGNMENT (continued)

7.3.4 The following is intended to provide examples of how and where compliance testing is measured:

D

B

C

A

B

F

F

E

E

Measured on the concave face

A - Gaps when surfaces are mitered or butted

B - Gaps when parallel pieces are joined

C - Gaps when edges are mitered or butted

D - Flushness between two surfaces

E - Flatness of panel product

F - Flushness of edgebanding

G - Chipout

G

8